點擊圖片查看大圖尼龍?jiān)鲰g劑產品說明
特性：此系列產品為馬來酸酐、丙烯酸酯雙官能化的乙烯類彈性體。
尼龍?jiān)鲰g劑產品性能
|
產品
|
外觀 |
熔融指數(190℃，2.16Kg)：g/10min |
接枝率 |
密度(g/cm3) |
|
KT-9 |
白色或淡黃色均勻顆粒 |
1.0-3.0 |
0.8-1.2 |
0.90 |
|
KT-915 |
白色或淡黃色均勻顆粒 |
0.2-0.8 |
1.0-2.0 |
0.87 |
|
KT-10A |
白色均勻顆粒 |
0.7-2.0 |
1.0-1.5 |
0.89 |
用途：
1．用于PA6、PA66增韌等。提高尼龍的抗沖擊性，耐寒性，成型加工性，降低吸水率。
2．用于尼龍與聚丙烯、聚乙烯共混合金的相容劑。
3．用于礦物和玻璃纖維填充的尼龍的大分子改性劑(偶聯劑)。
表一：PA6樹脂增韌典型數據
性 能 |
單 位 |
PA6 |
PA6+12%（尼龍?jiān)鲰g劑） |
PA6+20%（尼龍?jiān)鲰g劑） |
||
|
KT-9 |
KT-10A |
KT-9 |
KT-10A |
|||
|
拉伸強度 |
MPa |
70 |
65 |
57 |
51 |
47 |
|
彎曲強度 |
MPa |
92 |
86 |
80 |
78 |
75 |
|
懸臂梁沖擊強度 |
KJ/m2 |
10 |
40 |
42 |
76 |
78 |
表二：PA66樹脂增韌典型數據
|
性 能 |
單位 |
PA66 |
PA66 +12%（尼龍?jiān)鲰g劑） |
PA66 +20%（尼龍?jiān)鲰g劑） |
||
|
KT-915 |
KT-10A |
KT-915 |
KT-10A |
|||
|
拉伸強度 |
MPa |
75 |
53 |
54 |
47 |
50 |
|
彎曲強度 |
MPa |
102 |
59 |
62 |
55 |
57 |
|
懸臂梁沖擊強度 |
KJ/m2 |
8 |
60 |
57 |
86 |
80 |
注：上述數據為實驗典型值，真實可靠。僅供參考，不作為正式質保承諾。
建議用量：可根據韌性要求，兼顧成本，適量增減(5-25%)。PA6、PA66增強增韌3-5%，尼龍與聚丙烯、聚乙烯共混合金的相容劑5%。
包裝及儲運：20Kg牛皮紙袋內襯塑料袋裝，按非危險品，在干燥條件下儲運，避日光、雨淋。
The Introduction Of Toughener For Nylon
Property:The product is the MAH and acrylic ester dualfunctional ethylene elastomers.
The performance of Toughener For Nylon
Product |
Appearance |
Melt Flow Rate (190℃，2.16Kg) |
Grafting rate |
Density |
|
KT-9 |
white or light yellow particle |
1.0-3.0 |
0.8-1.2 |
0.90 |
|
KT-915 |
white or light yellow particle |
0.2-0.8 |
1.0-2.0 |
0.87 |
|
KT-10A |
white or light yellow particle |
0.7-2.0 |
1.0-1.5 |
0.89 |
Usage:
1.Used as toughness of PA6 （and PA66）, reinforcing & toughening, fire-retardance & toughening, reinforcing & fire retardance toughening etc. Improving impact strength, cold resistance and lowing water absorption of nylon.
2. Used as compatibilizer in blending alloy of PA and PP、PE.
3. Used as big molecular modified agent (coupling agent) of nylon which filling with mineral and GF.
Figure 1: Typical data of toughening PA6
Performance |
Unit |
PA6 |
PA6+12%(Toughener) |
PA6+20% (Toughener) |
||
|
KT-9 |
KT-10A |
KT-9 |
KT-10A |
|||
|
Tensile strength |
MPa |
70 |
65 |
57 |
51 |
47 |
|
Flexural strength |
MPa |
92 |
86 |
80 |
78 |
75 |
|
Izod notched impact strength |
KJ/m2 |
10 |
40 |
42 |
76 |
78 |
Figure 2: Typical data of toughening PA66
Performance |
Unit |
PA66 |
PA66 +15% (Toughener) |
PA66 +20%(Toughener) |
||
|
KT-915 |
KT-10A |
KT-915 |
KT-10A |
|||
|
Tensile strength |
MPa |
75 |
53 |
54 |
47 |
50 |
|
Flexural strength |
MPa |
102 |
59 |
62 |
45 |
80 |
|
Izod notched impact strength |
KJ/m2 |
8 |
60 |
57 |
86 |
80 |
Notice: Above data is experiment typical, true and reliable. It isn’t commitment of the quantity guarantee, but reference.
Suggestion dosage: According to toughness requested, looking after both side and the cost, increasing or decreasing properly (5-25%). Toughening and strengthening PA6(and PA66) need 3-5%.
The compatibilizer of nylon and PP、PE blending alloy need 5%.
Packing, storage and transportation:Packed in 20Kg cow parchment takes with plastic takes inside. Not dangerous goods. Store and transport it at dry circumstance. Avoid sunlight and rain.
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換